| Chip-breaker | Customized |
|---|---|
| Tips R Angle | R050/R100/R150/R200 Etc |
| Coating | TiAlN Or Copmposite Coating |
| Dimensions | W:0.7~3.0mm. θ:0°or 16°. Rε: 0.05~0.1mm. |
| Standard | Refer To NTK And Kyocera |
| Insert Angle | 90° |
|---|---|
| Insert Number Of Cutting Edges | 3 |
| Insert Nose Radius | 0.0079 |
| Insert Application | Grooving Or Parting-off |
| Coating | TiAlN |
| Insert Number Of Cutting Edges | 3 |
|---|---|
| Insert Chipbreaker | / |
| Base Material | Tungsten Carbide |
| Insert Insertion Angle | 90° |
| Insert Insertion Direction | Right Or Left Hand |
| Insert Number Of Cutting Edges | 3 |
|---|---|
| Insert Nose Radius | 0.0079 |
| Insert Insertion Direction | Right Or Left Hand |
| Insert Chipbreaker | / |
| Insert Relief Angle | 10° |
| Insert Chipbreaker | / |
|---|---|
| Insert Angle | 90° |
| Insert Insertion Angle | 90° |
| Coating | TiAlN |
| Insert Number Of Cutting Edges | 3 |
| Insert Angle | 90° |
|---|---|
| Insert Style | Grooving |
| Insert Application | Grooving Or Parting-off |
| Insert Relief Angle | 10° |
| Insert Insertion Angle | 90° |
| Insert Chipbreaker | / |
|---|---|
| Standard | Refer To NTK And Kyocera |
| Insert Number Of Cutting Edges | 2 |
| Coating | TiAlN Or Copmposite Coating |
| Dimensions | W:0.7~3.0mm. θ:0°or 16°. Rε: 0.05~0.1mm. |
| Clamp Holder | CTPA_ R/L Etc |
|---|---|
| Insert Insertion Angle | 90° |
| Dimensions | W:0.7~3.0mm. θ:0°or 16°. Rε: 0.05~0.1mm. |
| Insert Chipbreaker | / |
| Insert Application | Metal Cutting,Grooving And Back Turning |
| Standard | Refer To NTK And Kyocera |
|---|---|
| Insert Insertion Direction | Right Or Left Hand |
| Insert Chipbreaker | / |
| Insert Application | Metal Cutting,Grooving And Back Turning |
| Base Material | 100% Virgin Tungsten Carbide |
